home *** CD-ROM | disk | FTP | other *** search
-
-
-
- EEEEJJJJEEEECCCCTTTT((((1111)))) EEEEJJJJEEEECCCCTTTT((((1111))))
-
-
-
- NNNNAAAAMMMMEEEE
- eject - eject a removable media device
-
- SSSSYYYYNNNNOOOOPPPPSSSSIIIISSSS
- eeeejjjjeeeecccctttt [ [ _c_o_n_t_r_o_l_l_e_r__i_d ] _s_c_s_i__i_d [ _l_u_n ] | _d_e_v_i_c_e | _d_i_r ]
-
- DDDDEEEESSSSCCCCRRRRIIIIPPPPTTTTIIIIOOOONNNN
- eeeejjjjeeeecccctttt ejects a removable mediad device. If the device has mounted
- filesystems, eeeejjjjeeeecccctttt will first try to unmount them.
-
- Without any options, eeeejjjjeeeecccctttt will act upon the first device it finds in the
- hardware inventory table.
-
- OOOOPPPPTTTTIIIIOOOONNNNSSSS
- _d_e_v_i_c_e
- Specify the device to eject. The device may be specified using any
- of the names described in the _m_e_d_i_a_d(_1_m) man page. Note that some
- devices do not support software eject.
-
- _d_i_r If mmmmeeeeddddiiiiaaaadddd is running, the mount point of the filesystem on the disk
- to be ejected can be specified.
-
- [_c_o_n_t_r_o_l_l_e_r__i_d] _s_c_s_i__i_d
- If mmmmeeeeddddiiiiaaaadddd is running, the controller id and the scsi id of the
- device to be ejected can be specified. If the controller id is left
- out, it will default to 0.
-
- FFFFIIIILLLLEEEESSSS
- /dev/rdsk/fd* floppy devices
- /dev/scsi/* generic SCSI devices (for CD-ROM drives)
- /dev/tape shorthand for the tape device on the system
- /dev/rmt/* real name for all tape devices on the system
- /etc/fsd.tab table of devices monitored by mediad
-
- EEEERRRRRRRROOOORRRRSSSS
- An error will occur if the specified device does not have a disk in it,
- or if the file system on the disk couldn't be unmounted.
-
- EEEEXXXXAAAAMMMMPPPPLLLLEEEESSSS
- eject /dev/scsi/sc0d6l0 eject CD-ROM disk (controller 0 SCSI id 6)
- eject /dev/rdsk/fds0d2.3.5 eject floppy disk (controller 0 SCSI id 2)
- eject 0 2 eject floppy disk (controller 0 SCSI id 2)
- eject 2 eject floppy disk (controller 0 SCSI id 2)
-
-
- SSSSEEEEEEEE AAAALLLLSSSSOOOO
- mediad(1M), mount(1M), umount(1M), ds(7M), smfd(7M)
-
- DDDDIIIIAAAAGGGGNNNNOOOOSSSSTTTTIIIICCCCSSSS
- The exit codes for eject have the following meanings:
- 0 : success
- 1 : Incorrect usage. Check the eject man page.
-
-
-
- PPPPaaaaggggeeee 1111
-
-
-
-
-
-
- EEEEJJJJEEEECCCCTTTT((((1111)))) EEEEJJJJEEEECCCCTTTT((((1111))))
-
-
-
- 2 : The drive is busy. Make sure no programs are using the drive.
- 3 : Unable to eject. Try hardware eject.
- 4 : There is no media in the drive. Make sure you are specifying the
- right drive.
- 5 : Software eject not supported. Use hardware eject.
- 6 : No such device. Check your scsi id, fsname, or dir.
- 7 : A system error has occurred. See /var/adm/SYSLOG for more info.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- PPPPaaaaggggeeee 2222
-
-
-
-
-
-
-